Call us!  (559) 233-6115

Shop

LUBE USA AMS Automatic Small Discharge Volume Gear Pump

Price: $0.00

Motor driven gear pump for continuous micro-volume lubrication
used with a resistance type centralized lubrication equipment.

Category:

DESCRIPTION:

Motor driven gear pump for continuous micro-volume lubrication used with a resistance type centralized lubrication equipment.

Specifications

 

AMS-1 AMS-3 AMS-6
Pump Discharge Volume AMS-1:1.25ml/min (50Hz) 1.5ml/min (60Hz)
AMS-3:2.5ml/min (50Hz) 3ml/min (60Hz)
AMS-6:5ml/min (50Hz) 6ml/min (60Hz)
Discharge Pressure 0.8MPa (safety valve set pressure)
Motor
(Other voltages available.)
Voltage / Current AC100Vφ1/50mA AC200Vφ1/25mA (50Hz)
AC100Vφ1/42mA AC200Vφ1/18mA (60Hz)
AC100Vφ1/25mA AC200Vφ1/18mA (60Hz)
Output 3W Synchronous Motor
Emergency Detection Oil level
Oil Level Switch
Contact Type A Contact (NO) ON at low level
Contact capacity 0.5A, AC DC200V/30W smaller
Operation Rating Continuous
Working Viscosity Range 32〜1300mm2/S
Reservoir Capacity 1.8l、3l (plastic) 3l、4l、8l (sheet metal)
Weight 1.8kg
AMS-15
Pump Discharge Volume 15ml/min (50Hz) 18ml/min (60Hz)
Discharge Pressure 0.8MPa (safety valve set pressure)
Motor
(Other voltages available.)
Voltage / Current AC100Vφ1/0.25A (50/60Hz) 200Vφ1
Output 5.0W Condesor3.0μF_ Accessory
Gear Head Speed Reduction Ratio: 1/25
Working Viscosity Range 32〜1300mm2/S
Reservoir Capacity 1.8l、3l (plastic) 3l、4l、8l (sheet metal)
Weight 2.3kg

 

APPLICATION:

Automatic Small Discharge Volume Gear Pump AMS How to Order

Model

Model Part Number
AMS-1-1 102401
AMS-1-1L 102403
AMS-1-2 102402
AMS-1-2L 102404
AMS-15-1 102416
AMS-15-1L 102418
AMS-15-2 102417
AMS-15-2L 102419
AMS-3-1 102405
AMS-3-1L 102407
AMS-3-2 102406
AMS-3-2L 102408
AMS-6-1 102489
AMS-6-1L 112094
AMS-6-2 102490
AMS-6-2L 112095

Replacement Motor Model

Pump Part Number Voltage Replacement Motor Model
AMS-1 521194 100V M-B1
521196 200V M-B2
AMS-3 521194 100V M-B1
521196 200V M-B2
AMS-6 521210 100V M-A1
521328 200V M-A2

Directions for use

Replace or clean the suction filter at least once a year. Click here to view the service list.
Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table.
Do not use any special additive-contained oil, water soluble oil and solvent.
Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change.
Make sure that proper voltage and pressure are proper.
Do not overtighten the discharge joint. Refer to the tightening torque table.
For system planning information, Contact us.

Document

Pump Drawing
Hydraulic circuit drawing
Wiring digram
Wiring digram
Dimensional Drawing
Dimensional drawing
warning Improper handling can result in a death or serious injury.
Electrical shock may be received under certain conditions Electrical shock may be received under certain conditions.。
Be sure to ground. Be sure to ground.

 

Additional information

Dimensions 11.25 × 8.75 × 8 in