<strong>Specifications:</strong>
Table Size: 10″ X 54″
T-Slots: 3 x 0.625″ x 2.5″
X Axis Travels: 35″
Y Axis Travels: 16.3″
Z Axis Travels (Quill): 5″
Main Motor: 3 HP
Ram Travel: 18.5″
Knee Travel: 15.3″
Throat Distance: 9.6″ ~ 28.1″
Spindle to Table Top: 5.31″ ~ 20.7″
Spindle Nose: R-8 or #30 NST
Spindle RPM: 60 – 4,500 RPM
Quill Feeds: 0.0016″/0.0031″/0.0063″
Voltage: 230V AC ~ 1 PH/ 3 PH
<strong>Standard Equipment:</strong>
Quill Heat Treated, Hardened & Chromed
One Shot Lubrication
Emergency Stop
Meehanite Casting
Dual Cooling Fans
A/C Inverter Drive
Call for Price
<strong>Outstanding Features</strong>
<ul>
<li>Infinite speeds up to 4500 RPM</li>
<li>3” quill hardened & ground</li>
<li>Thread roller and ground all 3 direction leadscrew</li>
<li>Hardened & ground ways with TURCITE type bearing surface</li>
<li>Multiple head support for additional 2 or 3 heads</li>
</ul>
Call for Price
<ul>
<li>Main Motor: 5HP, 220V only, 3 Phase, 60 Cycle Main</li>
<li>NT#40 Spindle Nose</li>
<li>Class 7 Spindle bearings</li>
<li>Variable speed change (60 – 4200 RPM)</li>
<li>Chromed Quill</li>
<li>3 Quill Feeds Up & Down With Auto Stops</li>
<li>Max Spindle Accuracy Within .0002” (.0051mm)</li>
<li>10” x 54” Hardened & Ground Table</li>
<li>Square Ways in Both Y & Z Directions</li>
<li>Hardened & Ground Back Gear & Clutch</li>
<li>Double Nuts Backlash Eliminator On X+Y Axes</li>
<li>Double Lock for Table and Knee</li>
<li>Adjusting Tool & Tool Box</li>
</ul>
Call for Price
<ul style="list-style-type: circle">
<li>3 HP spindle motor, variable speed milling head with AC-Frequency drive, digital RPM display, analog load meter, and automatic spindle direction reversal when switching between high & low speed ranges</li>
<li>9” x 49” hardened and ground table top</li>
<li>T-slots ground parallel to table ways</li>
<li>Table, saddle, and knee with hardened and ground dovetail ways</li>
<li>Precision ground leadscrews with backlash compensating double nut</li>
<li>Precision bored and ground milling head, with super precision ABEC-7 bearings</li>
<li>Meehanite® casting, with built in coolant reservoir in machine base</li>
<li>Automatic lubrication, with metered check-valves</li>
</ul>
Call for Price
