Machine Specifications
MODEL: FTV-2F.
.
Table
Table size 55.25” x 10” (1,403 x 254 mm)
T-slots 3 on 2.51” centers (3 on 64 mm)
T-slot size 0.63” (16 mm)
Maximum weight on table 750 lbs. (340 kg) evenly distributed
Travels
Table travel X-axis, manual/ with power feed 37.99” / 34.64” (965 / 880 mm)
(Depending on power feed)
Cross travel, Y axis 15.98” (406 mm)
Knee travel, Z axis 15.98” (406 mm)
Ram travel 22.44” (570 mm)
Head
Main motor 5 HP (3.72 kW)
Mechanical Infinite variable speed with (High-Low) manual settings 55 to 4,250 RPM. Low (55 to 490 RPM) High (490 to
4,250 RPM). (Opt. Electronic Variable Speed- 0 to 4,200)
Head swivel (Left to right) +/- 90°
Head tilt (Front to back) +/- 45°
Distance, spindle to column 5 to 26.96” (127 to 685 mm)
Distance, spindle to table 0 to 17.99” (0 to 457 mm)
Drilling Capacity
Mild Steel (Manual) 1.25” (32 mm) Ø
Mild Steel (Manual) 0.75” (19 mm) Ø
Milling Capacity
Mild Steel 4 cu. in./min. (64 cc /min.)
Boring Range
Mild Steel To 8” (203 mm) Ø
Quill
Power quill feeds .0015, .00314, .00511 in./rev (0.04;0.08; 0.13mm/rev)
Spindle taper R-8 (Opt. #40 NST; #30 NST; or Universal Q.S. 200 or 300)
Quill diameter 3.38” (86 mm)
Quill travel 5” (127 mm)
Machine Constructive Dimensions
Column turret diameter (graduated) 15” (381 mm)
Knee width 11.49” (292 mm)
Knee to column bearing length 17.99” (457 mm)
Saddle & table bearing length 22.99” (584 mm)
Ram & turret bearing length 19.01” (483 mm)
Ram length 35.98” (914 mm)
Physical
Weight 2,854 lbs. (1,295 kg)
Height 89.17” (2,265 mm)
Width 72.65” (1,845.31 mm)
Depth 60.55” (1,539 mm)
Power, Dual Voltage Motors 230/440 Volts / 3 Phase/ 6 Cycles
STANDARD EQUIPMENT:
• Spindle taper R-8 with 4 ea. class seven hi-precision bearings
• Flood coolant system
• Hardened & precision ground ways
• One shot lubrication system
• Draw bar
• Operators manual/parts list
• Basic service tool kit
• 3/60/220/440 volt electrics.
