Description
DESCRIPTION:
Compact version of MMXL-III. Ideal for small machines with limited installation space.
Specifications
| Pump | Discharge Volume | 1.5ใ2.5ml/stroke | |
|---|---|---|---|
| Discharge Pressure | 0.3MPa | ||
| Motor | Voltage / Current | AC100Vฯ1/50mAใAC200Vฯ1/25mA (50Hz) AC100Vฯ1/42mAใAC200Vฯ1/18mA (60Hz) |
|
| Output | 3WใSynchronous Motor | ||
| Emergency Detection | Oil level | ||
| Oil Level Switch |
|
||
|
|||
| Operation Rating | Continuous | ||
| Working Viscosity Range | 32ใ1300mm2/S | ||
| Reservoir Capacity | 0.8l | ||
| Weight | 1.2kg | ||
| Protection class | IP54 (CE Approved type) | ||
APPLICATION:
Model
| Model | Part Number |
|---|---|
| MLZ-CE-A-1 | 367201 |
| MLZ-CE-A-1L | 367216 |
| MLZ-CE-A-2 | 367206 |
| MLZ-CE-A-2L | 367221 |
| MLZ-CE-B-1 | 367202 |
| MLZ-CE-B-1L | 367217 |
| MLZ-CE-B-2 | 367207 |
| MLZ-CE-B-2L | 367222 |
| MLZ-CE-C-1 | 367203 |
| MLZ-CE-C-1L | 367218 |
| MLZ-CE-C-2 | 367208 |
| MLZ-CE-C-2L | 367223 |
| MLZ-CE-D-1 | 367204 |
| MLZ-CE-D-1L | 367219 |
| MLZ-CE-D-2 | 367209 |
| MLZ-CE-D-2L | 367224 |
| MLZ-CE-E-1 | 367205 |
| MLZ-CE-E-1L | 367220 |
| MLZ-CE-E-2 | 367210 |
| MLZ-CE-E-2L | 367225 |
Replacement Motor Model
| Interval | 6min. | 15min. | 30min. | 60min. | 120min. | ||
|---|---|---|---|---|---|---|---|
| ใMortor RPMrpm (50Hz) | 10 | 4 | 2 | 1 | 1/2 | ||
| ใReplacement Motor Model | 100V | Model | M-B1 | M-C1 | M-D1 | M-E1 | M-F1 |
| Part Number | 521194 | 521193 | 520062 | 520061 | 520060 | ||
| 200V | Model | M-B2 | M-C2 | M-D2 | M-E2 | M-F2 | |
| Part Number | 521196 | 521195 | 520067 | 520066 | 520065 | ||
Directions for use
| โ | Replace or clean the suction filter at least once a year. Click here to view the service list. |
| โ | Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table. |
| โ | Do not use any special additive-contained oil, water soluble oil and solvent. |
| โ | Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change. |
| โ | Make sure that proper voltage and pressure are proper. |
| โ | Do not overtighten the discharge joint. Refer to the tightening torque table. |
| โ | Do not press the discharge volume adjusting knob down by force. |
| โ | Adjust discharge volume only when the piston is fully relaxed ( The knob is at the lowest position.). |
| โ | For system planning information, Contact us. |
Discharge Volume Adjustment
Document
Pump Drawing
Wiring digram
Dimensional Drawing
 |
Improper handling can result in a death or serious injury. |
 |
Electrical shock may be received under certain conditions.ใ |
 |
Be sure to ground. |
