<ul style="list-style-type: circle">
<li>3 HP spindle motor with AC-Frequency drive, digital RPM display, load meter, and automatic spindle direction reversal when switching between high and low speed gear ranges. Can run on either single phase or 3 phase power</li>
<li>10” x 50” (Opt. 10″ x 54″) hardened and ground table top</li>
<li>Table, saddle, and knee with hardened and ground dovetail ways</li>
<li>Precision ground leadscrews with backlash compensating double nut</li>
<li>Precision bored and ground milling head, with super precision ABEC-7 bearings</li>
<li>Meehanite castings, with built in coolant reservoir in machine base</li>
<li>Centralized one-shot lubrication, with metered check-valves</li>
<li>Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales</li>
<li>Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display</li>
</ul>
Call for Price
<span style="font-size: 14pt"><strong>Outstanding Features</strong></span>
<ul>
<li>Swivel table ±45 degrees</li>
<li>Flood coolant system</li>
<li>Low voltage controls</li>
<li>Pendant controls</li>
<li>Variable feeds in 3 axis</li>
<li>3 axis rapid traverse</li>
<li>Spindle brake</li>
<li>Auto lube system</li>
<li>Climb milling control</li>
<li>Hardened and ground ways</li>
</ul>
Call for Price
<ul>
<li>Main Motor: 5HP, 220V only, 3 Phase, 60 Cycle Main</li>
<li>NT#40 Spindle Nose</li>
<li>Class 7 Spindle bearings</li>
<li>Variable speed change (60 – 4200 RPM)</li>
<li>Chromed Quill</li>
<li>3 Quill Feeds Up & Down With Auto Stops</li>
<li>Max Spindle Accuracy Within .0002” (.0051mm)</li>
<li>10” x 54” Hardened & Ground Table</li>
<li>Square Ways in Both Y & Z Directions</li>
<li>Hardened & Ground Back Gear & Clutch</li>
<li>Double Nuts Backlash Eliminator On X+Y Axes</li>
<li>Double Lock for Table and Knee</li>
<li>Adjusting Tool & Tool Box</li>
</ul>
Call for Price
<h2>Standard Features</h2>
<ul>
<li>3 HP Motor, R8 Nose</li>
<li>Square Ways in Both Y & Z Axis</li>
<li>Meehanite Casting</li>
<li>Turcite-B on X & Y Axis</li>
<li>Class 7 Precision Bearing (P4) for Spindle</li>
<li>Dual Locks on Knee, Table, Saddle, & Ram</li>
<li>Max Spindle Runout .0002</li>
</ul>
Call for Price