Call us!  (559) 233-6115

Kent USA KTM-3VS Manual Knee Milling Machine

Price: Call for Price

  • 3 HP spindle motor, 60-4200 infinitely variable speed milling head
  • 9” x 49” hardened and ground table
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Centralized one-shot lubrication, with metered check-valves
Category:
Specification KTM-3VS
Table Size 9″ x 49″ (Opt. 9″ x 42″)
Table Travel (X-Axis) 35″
Saddle Travel (Y-Axis) 12″
Knee Travel (Z-Axis) 15″
Quill Travel 5″
Ram Travel 14.5″
Spindle Motor 3 HP
Spindle Speed 60–500–4200 RPM (standard variable speed model)
Spindle Taper R-8 (NMTB-30 or Quick change spindle optional)
Quill Diameter 3.375″
Quill Feed Rate 0.0015″ / 0.003″ / 0.006″ in/rev
Drilling Capacity (Manual / Power) 0.75″ / 0.37″ diameter
Boring Capacity 6″ diameter
Milling Capacity 2.0 in³/min
Maximum Work Load (Center) 850 lbs
Spindle Center to Column 5″ – 19.5″
Net Weight 2500 lbs
Gross Weight 2800 lbs
Shipping Dimensions 72″ x 72″ (skid)
Power Requirements 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp)

Accessories

  • Quick change tooling package (Mach-1)
  • Digital Readout System (View Brochure)
  • NMTB-30 spindle
  • Flood coolant system (Built-in base)
  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • 3-D Edge Finder
  • Flood Coolant System
  • Chip Tray
  • Knee Linear Encoder Feedback for Coupled Z-Axis Position
  • AMI with programmable M-functions