Kent USA KTM-3VKF CNC Milling Machine

Kent USA KTM-3VKF CNC Milling Machine

Call for Price

  • 3 HP spindle motor with AC-Frequency drive, digital RPM display, load meter, and automatic spindle direction reversal when switching between high and low speed gear ranges.   Can run on either single phase or 3 phase power
  • 10” x 50” (Opt. 10″ x 54″) hardened and ground table top
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite castings, with built in coolant reservoir in machine base
  • Centralized one-shot lubrication, with metered check-valves
  • Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales
  • Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display
Category:

KTM-3VKF CNC w/ MillPwr

Specifications

Specification KTM-3VKF CNC w/ MillPwr
Table Size 10″ x 50″ (Opt. 10″ x 54″)
Table Travel (X-Axis) 32″
Saddle Travel (Y-Axis) 14″
Knee Travel (Z-Axis) 15″
Quill Travel 4″ w/ MillPwr3 G2 CNC Control
Ram Travel 22″
Spindle Motor 3 HP
Spindle Speed AC Frequency Drive Head 60-550-4500 RPM
Spindle Taper R-8
Quill Diameter 3.375″
Quill Feed Rate 0.0015″ / 0.003″ / 0.006″ in/rev
Drilling Capacity (Manual / Power) 0.75″ / 0.37″ diameter
Boring Capacity 6″ diameter
Milling Capacity 2.0 in³/min
Maximum Work Load (Center) 850 lbs
Spindle Center to Column 5″ – 27″
Net Weight 3100 lbs
Gross Weight 3300 lbs
Shipping Dimensions 72″ x 72″ (skid)
Power Requirements 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power

Accessories

  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant

Related products

  • Republic Lagun MVM-1 MILLING MACHINE

    • Day Rate

      Call for Price
    <strong>Outstanding Features</strong> <ul> <li>Variable speed head</li> <li>Providing full HP at all RPM’s</li> <li>R-8 spindle taper</li> </ul>  
    Call for Price

  • ACRA LCTM-1 Vertical Variable Speed Milling Machine

    • Day Rate

      Call for Price
    <strong>Specifications:</strong> Table Size:  10″ X 54″ T-Slots:   3 x 0.625″ x 2.5″ X Axis Travels:  39″ Y Axis Travels:  16.3″ Z Axis Travels (Quill): 5″ Main Motor:   3 HP Ram Travel:   18.5″ Knee Travel:  15.3″ Throat Distance: 9.6″ ~ 28.1″ Spindle to Table Top: 5.31″ ~ 20.7″ Spindle Nose:  R-8 or #30 NST Spindle RPM: 60 – 4,500 RPM Quill Feeds: 0.0016″/0.0031″/0.0063″ Voltage:  230/460V AC ~ 3 PH <strong>Standard Equipment:</strong> Quill Heat Treated, Hardened & Chromed One Shot Lubrication Emergency Stop Meehanite Casting
    Call for Price

  • Acra RF-31 Step Pulley Bench Type Manual Milling/Drilling Machine

    • Day Rate

      $2,995.00
    Used for milling, drilling, routing, boring, cutting key ways and many other routine light-duty operations. Ideally suited for home or machine and maintenance shops. Rigid construction.
    Add to cart

  • LAGUN Megamill Vertical Knee Mill MVM-2

    • Day Rate

      Call for Price
    <strong>Outstanding Features</strong> <ul> <li>Infinite speeds up to 4500 RPM</li> <li>3” quill hardened & ground</li> <li>Thread roller and ground all 3 direction leadscrew</li> <li>Hardened & ground ways with TURCITE type bearing surface</li> <li>Multiple head support for additional 2 or 3 heads</li> </ul>
    Call for Price