<strong>Outstanding Features</strong>
<ul>
<li>The new FTV-2F model comes standard with 5” (127 mm) more table length and 5.5” (139 mm) more table travel than our previous FTV-2.</li>
<li>Mechanical infinite variable speed head</li>
<li>Providing full HP at all RPM’s</li>
<li>R-8 spindle taper</li>
<li>Square ways for rigidity and dovetail ways for accuracy</li>
</ul>
Call for Price
<ul style="list-style-type: circle">
<li>3 HP spindle motor with AC-Frequency drive, digital RPM display, load meter, and automatic spindle direction reversal when switching between high and low speed gear ranges. Can run on either single phase or 3 phase power</li>
<li>10” x 50” (Opt. 10″ x 54″) hardened and ground table top</li>
<li>Table, saddle, and knee with hardened and ground dovetail ways</li>
<li>Precision ground leadscrews with backlash compensating double nut</li>
<li>Precision bored and ground milling head, with super precision ABEC-7 bearings</li>
<li>Meehanite castings, with built in coolant reservoir in machine base</li>
<li>Centralized one-shot lubrication, with metered check-valves</li>
<li>Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales</li>
<li>Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display</li>
</ul>
Call for Price
<span style="font-size: 14pt"><strong>Outstanding Features</strong></span>
<ul>
<li>Swivel table ±45 degrees</li>
<li>Flood coolant system</li>
<li>Low voltage controls</li>
<li>Pendant controls</li>
<li>Variable feeds in 3 axis</li>
<li>3 axis rapid traverse</li>
<li>Spindle brake</li>
<li>Auto lube system</li>
<li>Climb milling control</li>
<li>Hardened and ground ways</li>
</ul>
Call for Price
<strong>Specifications:</strong>
Table Size: 9″ X 42″
X Axis Travel: 30″
Y Axis Travel: 12″
Z Axis Travel: 5″
T-Slots: 3 x 0.625″ x 2.5″
Ram Travel: 12″
Knee Travel: 16″
Throat Distance: 6.75″ ~ 18.75″
Spindle to Table Top: 0 ~ 18.5″
Main Motor: 3 HP
Spindle Nose: R-8 or #30 NST
Spindle RPM: 60 – 4,500 RPM
Quill Feeds: 0.0016″/0.0031″/0.0063″
Voltage: 230/460V AC~3 PH
<strong>Standard Equipment</strong>
Quill Heat Treated, Hardened & Chromed
One Shot Lubrication
Emergency Stop
Call for Price
