DESCRIPTION:
Air-driven piston pump operated by a three-way solenoid valve.
APPLICATION:
Specifications
| Pump ratio | 1：5(Air pressure 0.5MPa) |
|---|---|
| Discharge rate | 8ml / shot (6ml, 7ml ~ order product) |
| Use viscosity | Spraying method: Oil shot 10 to 100㎟ / s Oil / air, mist 10 to 1800㎟ / sPlease contact us if you are using a special solution. |
| Characteristics of the air pressure and air consumption | 0.4MPa-0.27NL / shot 0.5MPa-0.3NL / shot Valve the total discharge amount of about 5ml |
| Amount of coating | (A 0.5ml of the valve can be up to 10 locations in the case of use) |
| Reservoircapacity | 1.8LResin Reservoir (standard) 3LResin Reservoir, 3L, 4L, 8L sheet metal Reservoir (Option) |
| OptionSpecifications | |
| Three-way solenoid valve | Voltage: AC100V, AC200V, DC24V |
| Oil level switch | Contact (NO) ON at the lower limit |
| Contact capacity | AC, DC200V30W or resistive load, 0.5A any smaller |
| Weight | 1.8L：1.2kg、8L：11.0kg |
FEATURES:
Model
| Model | Part Number | Level Switch Electrical Connections | Reservoir |
|---|---|---|---|
| PM-8S | 102660 | – | 1.8 L |
| PM-8S-L | 102754 | Flying Leads | 1.8 L |
| PM-8S-L | 112988 | Terminal Box | 1.8 L |
| PM-8S-3L | PM8S3L | Terminal Box | 3 L |
Directions for use
| ● | By PM type Pump is air pressure, is air drive Pump to perform the reciprocating motion of the piston. At the time of turning on and off of the air is, it is always required three-way switching valve. |
| ● | PM type Pump has been designed so as to generate a discharge pressure 0.5MPa to air input pressure 0.1MPa (Pump ratio of 1: 5). However, since Operating pressure is more than 1.2MPa of the metering valve, air input pressure, please set to always keep the 0.45~0.7MPa. Also, please be adjusted to air input pressure is not to 0.45MPa than Foot even when the oil (liquid) is too jump than the jet nozzle of the tip. |
| ● | Is to use oil viscosity range of (liquid) is 10㎟ / s ~ 100㎟ / s (when using viscosity). If extremely high viscosity may not be able to repeat the discharge with a short cycle (intermittent hour). |
| ● | The PM type Pump, aluminum material (Pump body), acetate resin (standard reservoir), so we NBR rubber material (O-ring) is used, if you want to use a special oil (liquid) is to the nearest business office please contact us. |
Document
Pump Drawing
Dimensional Drawing
