Call us!  (559) 233-6115

Shop

ACRA 2690ACH Precision Gap Bed Engine Lathe

Price: Call for Price

Specifications:

Capacity:  26″/35″ x 90″

Swing Over Bed: 26″
Swing Over Cross Slide: 17-1/2″
Swing In Gap: 35-1/8″
Distance Between Centers: 90″
Bed Width: 15-3/4″

Headstock:
Spindle Nose: D1-11
Spindle Bore: 4-1/16″
Taper of Spindle: MT NO.7 x MT NO.5
Spindle Speeds – Steps: 12
Spindle Speeds – Range: 13 ~ 1,200 RPM

Carriage:
Cross Slide Travel: 15-3/4″
Compound Slide Travel: 9-1/2″

Threads & Feeds:
Inch Threads: 2 ~ 72 TPI
Metric Threads: 0.2 ~ 14 mm
Longitudinal Feeds: 0.0012 ~ 0.039 in/rev
Cross Feeds: 0.0004 ~ 0.0117 in/rev

Tailstock:
Quill Diameter: 2.935″
Quill Travel: 7″
Quill Taper: MT NO.5

Power:
Spindle Drive Motor: 15 H.P.
Voltage: 230/460V AC/3 PH

Standard Equipment:

  • MAIN MOTOR 15 HP
  • CENTER SLEEVE MT No. 5
  • DEAD CENTER MT NO. 5 X 2 PCs
  • LEVELING SCREW AND BLOCK
  • SERVICE KITS AND TOOL BOX
  • STEADY REST- 1-5/8″~10″
  • DRIVE PLATE- 12″ FOR D1-11 ONLY
  • COOLANT SYSTEM
  • MULTI – POSITION LENGTH STOP
  • 3 JAW SCROLL CHUCK- 15″
  • FULL LENGTH SPLASH GUARD
  • HALOGEN LIGHT
  • 4 WAY TOOL HOLDER
Category:

2690ACH Precision Gap Bed Engine Lathe

Specifications:

Capacity:  26″/35″ x 90″

Swing Over Bed: 26″
Swing Over Cross Slide: 17-1/2″
Swing In Gap: 35-1/8″
Distance Between Centers: 90″
Bed Width: 15-3/4″

Headstock:
Spindle Nose: D1-11
Spindle Bore: 4-1/16″
Taper of Spindle: MT NO.7 x MT NO.5
Spindle Speeds – Steps: 12
Spindle Speeds – Range: 13 ~ 1,200 RPM

Carriage:
Cross Slide Travel: 15-3/4″
Compound Slide Travel: 9-1/2″

Threads & Feeds:
Inch Threads: 2 ~ 72 TPI
Metric Threads: 0.2 ~ 14 mm
Longitudinal Feeds: 0.0012 ~ 0.039 in/rev
Cross Feeds: 0.0004 ~ 0.0117 in/rev

Tailstock:
Quill Diameter: 2.935″
Quill Travel: 7″
Quill Taper: MT NO.5

Power:
Spindle Drive Motor: 15 H.P.
Voltage: 230/460V AC/3 PH

Standard Equipment:

  • MAIN MOTOR 15 HP
  • CENTER SLEEVE MT No. 5
  • DEAD CENTER MT NO. 5 X 2 PCs
  • LEVELING SCREW AND BLOCK
  • SERVICE KITS AND TOOL BOX
  • STEADY REST- 1-5/8″~10″
  • DRIVE PLATE- 12″ FOR D1-11 ONLY
  • COOLANT SYSTEM
  • MULTI – POSITION LENGTH STOP
  • 3 JAW SCROLL CHUCK- 15″
  • FULL LENGTH SPLASH GUARD
  • HALOGEN LIGHT
  • 4 WAY TOOL HOLDER

Description

Acra’s 2690ACH Precision Gap Bed Engine Lathes are made in Taiwan and features the following:

Bed:
• MEEHANTIE CAST IRON, VIBRATION STRESSES RELIEVED.
• INDUCTION HARDENED (HS70 DEGREE) AND PRECISION GROUND.
• PRECISION HAND SCRAPED REMOVABLE GAP.
• FOOT BRAKE.

Universal Gear Box:
• OIL BATH LUBRICATION.
• HEAT-TREATED GEARS.
• INCH/METRIC/MODULE/DIAMETRICAL THREADS.
• OUTPUT SHAFT IS DESIGNED WITH SAFETY PIN

Apron and Saddle:
• MANUAL AND AUTOMATIC LUBRICATION SYSTEM-OIL DISTRIBUTOR ADJUSTED TO LUBRICATING BED WAYS AND CROSS SIDE OR BOTH.
• OVERLOAD PROTECTION DEVICE.
• CROSS SLIDE IS HARDENED AND PRECISION GROUND.
• CROSS SLIDE SCREWS ARE HARDENED AND OIL BATHED.
• FORWARD-OFF-REVERSE LEVER.
• TOP AND SADDLE SLIDE LOCKING SYSTEM.
• T-SLOT COMPOUND FOR AMERICA AREA.

Spindle:
• SUPPORTED BY 3 PRECISION P-GRADE TAPER ROLLER BEARINGS.
• DYNAMICALLY BALANCED, HARDENED AND PRECISION GROUND.
• ACH-2200 SERIES-D1-11 SPINDLE NOSE, SPINDLE HOLE 4.09″

Headstock:
• ALL GEARS MADE BY CHROMIUM MOLYBDENUM STEEL AND SEGMENTATION TREATED AND PRECISION GROUND.
• FORCED LUBRICATION SYSTEM

Tailstock:
• QUILL MADE BY CHROMIUM MOLYBDENUM STEEL WITH SEGMENTATION AND PRECISION GROUND.
• ACH-2200 SERIES-DIAMETER TAIL STOCK SPINDLE 2.935″ AND SPINDLE TRAVEL 7″.
• TWO SPEED WITH 1:1 AND 1/4:1 CHANGE FEEDS.

 

Additional information

Weight 7200 lbs
Dimensions 146 × 48 × 60 in

 

Pickup & Storage:

USED Items will be available for pickup 24 hours after payment is made Monday – Friday.  All items must be picked up within 7 days of auction end. Any items NOT picked up or otherwise arranged for pickup will incur a $20.00 per day charge for storage. Any items not picked up within 30 days will be forfeited and considered abandoned. Items will be sold to cover storage and restocking fees. If item is deemed abandoned the buyer will not qualify for any refunds or credits

 

Freight:

All orders under 149 lbs. can be shipped via United Parcel Services (UPS), Air or Ground.

Orders above 150 lbs. need to be shipped via freight carrier.

The buyer may select any shipping company they wish and are responsible for any and all freight charges. We offer a group of carriers that can furnish you with an estimate of shipping charges for all items.

Packaging and Pallet Fees:

A $200.00 fee for palliating and securing of equipment and goods.

Loading:

We offers free loading for most equipment. Items weighing 15,000 lbs. or more will incur rigging charges to be determined. Please call (800) 288-1202 to inquiry before purchasing item.