| Single Operator, 4 Stations |
| 65 Ton Punch Station (1-1/16″ in 3/4″) |
| Keyed Punch Ram for Safety |
| 9″ Throat Depth |
| Punch Gauging Table w/Fence and Scale |
| Die Holder Complete with 2″ Die Insert |
| Punch Nut with Wrench and Stripper |
| One Round Punch & Die: Max. Dia. 1-1/4″ |
| Punch Jog Control |
| Adjustable Electric Stroke Control with Scale |
| Electric Remote Foot Pedal |
| 24″ Flat Bar Shear with 4-Way Reversible Blade (1″ x 6″, 1/4″ x 24″) |
| Shear Table with Miter Fence |
| Angle Shear Capacity at 90° 6″ x 6″ x 3/8″ and 5″ x 5″ x 1/2″ |
| Tool Table Work Area |
| Slug Receptacle |
| Two-Stage Hydraulic Pump |
| Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations |
| 230/460 volt /3 Phase Electrics (must specify voltage) |
| All Guards Necessary to Comply with ANSI B 11-5 Standards |
| Forklift Accommodations |
| Warranty: Three Years on Parts |
| Made in USA |
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 65 ton 1-1/16″ in 3/4″ |
58 mt 27 mm in 18 mm |
| Special Tooling | 4″ Max. Dia. | 100 mm Max. Dia. |
| Throat Depth | 9″ | 225 mm |
| Flat Bar Shear | 24″ Length 1″ x 6″ 3/4″ x 10″ 1/2″ x 12″ 3/8″ x 16″ 1/4″ x 24″ |
600 mm 25 mm x 150 mm 18 mm x 250 mm 12 mm x 300 mm 10 mm x 400 mm 6 mm x 600 mm |
| Opt. Saber Blade | 1″ x 6″ 1/2″ x 16″ |
25 mm x 150 mm 12 mm x 400 mm |
| Angle Shear 90° | 6″ x 6″ x 3/8″ 5″ x 5″ x 1/2″ |
150 mm x 150 mm x 10 mm 125 mm x 125 mm x 12 mm |
| Angle Shear 45° (with Bar Shear) |
3″ x 3″ x 3/8″ 4″ x 4″ x 1/2″ |
75 mm x 75 mm x 10 mm 100 mm x 100 mm x 12 mm |
| Brake 12″ | 40 ton | 36 mt |
| Brake 24″ | 30 ton | 27 mt |
| Open End Brake | Max. 1/4″ x 5″ Flat or Angle Iron |
6 mm x 125 mm |
| Pipe Notcher Schedule 40 I.D. |
3/4″ 1″ 1-1/4″ 1-1/2″ 2″ |
19 mm 25 mm 32 mm 38 mm 50 mm |
| Rectangle Notcher | 2″ x 2-1/2″ x 3/8″ | 50 mm x 65 mm x 10 mm |
| 90° V. Notcher | 6″ x 6″ x 5/16″ | 150 mm x 150 mm x 8 mm |
| Channel Shear | 2″ to 5″ Adj. | 50 mm to 125 mm Adj. |
| Unistrut Shear | Samples Required | |
| Rod Shear Round Rod (Max.) Square Rod (Max.) |
1/4″ to 1-1/4″, 9 Cav. 1/4″ to 1″, 1 Cav. |
6 mm to 32 mm 6 mm to 25 mm |
| Square Tube Shear | 1/2″ to 2″, 12 ga. |
12 mm to 50 mm 2.75 mm |
| Picket Tool | 1/2″ 3/4″ 1″ 16 gauge |
12 mm 19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | 36 mt |
| Strokes Per Minute in Light Material | 1/4″ Stroke [Punch Station] | 67 spm |
| Strokes Per Minute in Heavy Material | 3/4″ Stroke [Punch Station] | 22 spm |
| Hydraulics | 2,600 psi | 183 bar |
| Motors Standard | 5 hp 3 ph 230/460 208/380/575 |
3.73 kW |
| Motors Optional | 5 hp 1ph 230v |
3.73 kW |
| Dimensions | W-24″ L-60″ H-66″ |
W-57 cm L-152 cm H-168 cm |
| Shipping Weight | 2,984 lbs. | 1,353 kg |
