Kent USA KTM-3VS Manual Knee Milling Machine

Kent USA KTM-3VS Manual Knee Milling Machine

Call for Price

  • 3 HP spindle motor, 60-4200 infinitely variable speed milling head
  • 9” x 49” hardened and ground table
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Centralized one-shot lubrication, with metered check-valves
Category:
Specification KTM-3VS
Table Size 9″ x 49″ (Opt. 9″ x 42″)
Table Travel (X-Axis) 35″
Saddle Travel (Y-Axis) 12″
Knee Travel (Z-Axis) 15″
Quill Travel 5″
Ram Travel 14.5″
Spindle Motor 3 HP
Spindle Speed 60–500–4200 RPM (standard variable speed model)
Spindle Taper R-8 (NMTB-30 or Quick change spindle optional)
Quill Diameter 3.375″
Quill Feed Rate 0.0015″ / 0.003″ / 0.006″ in/rev
Drilling Capacity (Manual / Power) 0.75″ / 0.37″ diameter
Boring Capacity 6″ diameter
Milling Capacity 2.0 in³/min
Maximum Work Load (Center) 850 lbs
Spindle Center to Column 5″ – 19.5″
Net Weight 2500 lbs
Gross Weight 2800 lbs
Shipping Dimensions 72″ x 72″ (skid)
Power Requirements 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp)

Accessories

  • Quick change tooling package (Mach-1)
  • Digital Readout System (View Brochure)
  • NMTB-30 spindle
  • Flood coolant system (Built-in base)
  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • 3-D Edge Finder
  • Flood Coolant System
  • Chip Tray
  • Knee Linear Encoder Feedback for Coupled Z-Axis Position
  • AMI with programmable M-functions

Related products

  • Republic Lagun Universal Horizontal Mill Model FU-130-EF

    Republic Lagun Universal Horizontal Mill Model FU-130-EF

    • Day Rate

      Call for Price
    <span style="font-size: 14pt"><strong>Outstanding Features</strong></span>   <ul> <li>Swivel table ±45 degrees</li> <li>Flood coolant system</li> <li>Low voltage controls</li> <li>Pendant controls</li> <li>Variable feeds in 3 axis</li> <li>3 axis rapid traverse</li> <li>Spindle brake</li> <li>Auto lube system</li> <li>Climb milling control</li> <li>Hardened and ground ways</li> </ul>
    Call for Price
  • ACRA LCM-42 Vertical Variable Speed Milling Machine

    ACRA LCM-42 Vertical Variable Speed Milling Machine

    • Day Rate

      Call for Price
    <strong>Specifications:</strong> Table Size: 9″ X 42″ X Axis Travel: 30″ Y Axis Travel: 12″ Z Axis Travel: 5″ T-Slots: 3 x 0.625″ x 2.5″ Ram Travel: 12″ Knee Travel: 16″ Throat Distance: 6.75″ ~ 18.75″ Spindle to Table Top: 0 ~ 18.5″ Main Motor: 3 HP Spindle Nose: R-8 or #30 NST Spindle RPM: 60 – 4,500 RPM Quill Feeds: 0.0016″/0.0031″/0.0063″ Voltage: 230/460V AC~3 PH <strong>Standard Equipment</strong> Quill Heat Treated, Hardened & Chromed One Shot Lubrication Emergency Stop
    Call for Price
  • LAGUN Megamill Vertical Knee Mill MVM-2

    LAGUN Megamill Vertical Knee Mill MVM-2

    • Day Rate

      Call for Price
    <strong>Outstanding Features</strong> <ul> <li>Infinite speeds up to 4500 RPM</li> <li>3” quill hardened & ground</li> <li>Thread roller and ground all 3 direction leadscrew</li> <li>Hardened & ground ways with TURCITE type bearing surface</li> <li>Multiple head support for additional 2 or 3 heads</li> </ul>
    Call for Price
  • Kent USA KTM-3VSF Manual Knee Milling Machine

    Kent USA KTM-3VSF Manual Knee Milling Machine

    • Day Rate

      Call for Price
    <ul style="list-style-type: circle"> <li>3  HP spindle motor, variable speed milling head with AC-Frequency drive, digital RPM display, analog load meter, and automatic spindle direction reversal when switching between high & low speed ranges</li> <li>9” x 49” hardened and ground table top</li> <li>T-slots ground parallel to table ways</li> <li>Table, saddle, and knee with hardened and ground dovetail ways</li> <li>Precision ground leadscrews with backlash compensating double nut</li> <li>Precision bored and ground milling head, with super precision ABEC-7 bearings</li> <li>Meehanite® casting, with built in coolant reservoir in machine base</li> <li>Automatic lubrication, with metered check-valves</li> </ul>
    Call for Price