Kingston HJ-1100 & HJ-1700 Lathe
Kingston HJ-1100 & HJ-1700 Lathe - Image 2
Kingston HJ-1100 & HJ-1700 Lathe - Image 3
Kingston HJ-1100 & HJ-1700 Lathe - Image 4
Kingston HJ-1100 & HJ-1700 Lathe - Image 5

Kingston HJ-1100 & HJ-1700 Lathe

Call for Price

Standard Features

  • 7.5 HP Motor for 230/460V, 3 Phase, 60 Cycle Wiring
  • 2.25” Spindle Bore
  • Spindle Nose: D1-6
  • 12 Spindle Speeds (35 – 2000 RPM)
  • 4-Way Tool Post, T-Slot Compound
  • 4.7” Steady Rest with Roller Jaws
  • 8” Drive Plate & 14” Face Plate
  • Coolant System With Pump And Piping
  • Hardened and Ground Bed and Cross Slide Ways
  • 10” 3-Jaw Scroll Chuck
  • LED Worklight
  • Full-Length Splash Guard & Chuck Guard

Optional Accessories

  • 6” Steady Rest (Roller Jaws)
  • 8” Steady Rest (Metal Jaws)
  • 3.5” Follow Rest
  • Taper Attachment
  • Carriage Stops
  • Aloris Quick Change Tool Posts & Sets
  • Digital Readout (DRO)
  • 5c Collet Closer
  • 3-Jaw & 4-Jaw Manual Chucks
  • 3″ Spindle Bore Upgrade
Category:

The HJ model is the perfect manual lathe for job shop production, repairs, reworking threads, and making fixtures and tooling. In addition to machine shops, schools also love the HJ because of its ease of operation and ability to withstand abuse. The hardened and ground main spindle features a 3-point bearing suppport with taper roller bearings for precision cutting. The HJ features a D1-6 Camlock spindle, 12 speeds from 35 – 2000 RPM and a 7.5 HP motor. The uniquely designed timing-belt-driven gear box offers a comprehensive range of inch and metric threads without the use of change gears, making for a smoother and quieter operating experience overall. Both bedway and cross slide are hardened and ground. Machine lengths available in 43″ or 67″.

Standard Features

  • 7.5 HP Motor for 230/460V, 3 Phase, 60 Cycle Wiring
  • 2.25” Spindle Bore
  • Spindle Nose: D1-6
  • 12 Spindle Speeds (35 – 2000 RPM)
  • 4-Way Tool Post, T-Slot Compound
  • 4.7” Steady Rest with Roller Jaws
  • 8” Drive Plate & 14” Face Plate
  • Coolant System With Pump And Piping
  • Hardened and Ground Bed and Cross Slide Ways
  • 10” 3-Jaw Scroll Chuck
  • LED Worklight
  • Full-Length Splash Guard & Chuck Guard

Optional Accessories

  • 6” Steady Rest (Roller Jaws)
  • 8” Steady Rest (Metal Jaws)
  • 3.5” Follow Rest
  • Taper Attachment
  • Carriage Stops
  • Aloris Quick Change Tool Posts & Sets
  • Digital Readout (DRO)
  • 5c Collet Closer
  • 3-Jaw & 4-Jaw Manual Chucks
  • 3″ Spindle Bore Upgrade
Capacity HJ-1100 HJ-1700
Swing Over Bed 17” 17”
Swing Over Cross Slide 10.6” 10.6”
Swing in Gap 24” 24”
Distance Between Centers 43.5” 67”
Width of Bed 11.75” 11.75”
Length in Front of Face Plate 5.9” 5.9”
Height of Center from Leg Bottom 42.3” 42.3”

 

Headstock HJ-1100 HJ-1700
Spindle Bore 2.25″ 2.25″
Taper of Spindle Bore & Center M.T. #6 x #4 M.T. #6 x #4
Type of Spindle Nose D1-6 D1-6
Number of Spindle Speeds 12 12
Spindle Speeds 35 – 2000 RPM 35 – 2000 RPM

 

Gearbox HJ-1100 HJ-1700
Number of Feed Changes 16 16
Range of Feeds per Revolution – Longitudinal 0.0012” – 0.039” 0.0012” – 0.039”
Range of Feeds per Revolution – Cross 0.0004” – 0.0117” 0.0004” – 0.0117”
Diameter and Pitch of Leadscrew ø1.38”, 4 TPI ø1.38”, 4 TPI
Range of Inch Threads 2 – 72 TPI (44) 2 – 72 TPI (44)
Range of Metric Pitches 0.2 – 14mm (39 kinds) 0.2 – 14mm (39 kinds)
Tool Slide HJ-1100 HJ-1700
Maximum Travel of Compound 5.7” 5.7”
Maximum Travel of Cross Slide 10.4” 10.4”

 

Tailstock HJ-1100 HJ-1700
Tailstock Quill Travel 6.7” 6.7”
Tailstock Quill Diameter 2.3” 2.3”
Taper in Tailstock Quill M.T. #4 M.T. #4

 

Motor HJ-1100 HJ-1700
Main Drive Motor 7.5 HP 7.5 HP
Coolant Pump Motor 1/8 HP 1/8 HP
Dimensions HJ-1100 HJ-1700
Floor Space (L x W) 98” x 41” 120” x 41”

 

Weight HJ-1100 HJ-1700
3,520 lbs 3,960 lbs

 

Related products

  • ACRA 2290ACH Precision Gap Bed Engine Lathe

    ACRA 2290ACH Precision Gap Bed Engine Lathe

    • Day Rate

      Call for Price
    <strong>Specifications:</strong> <strong>Capacity:</strong> 22″/31″ x 90″ Swing Over Bed: 22″ Swing Over Cross Slide: 13-3/8″ Swing In Gap: 31-3/8″ Distance Between Centers: 90″ Bed Width: 15-3/4″ Center Height: 11″ <strong>Headstock:</strong> Spindle Nose: D1-11 Spindle Bore: 4-1/16″ Taper of Spindle: MT NO.7 x MT NO.5 Spindle Speeds – Steps: 12 Spindle Speeds – Range: 13 ~ 1,200 RPM <strong>Carriage:</strong> Cross Slide Travel: 15-3/4″ Compound Slide Travel: 9-1/2″ <strong>Threads & Feeds:</strong> Inch Threads: 2 ~ 72 TPI Metric Threads: 0.2 ~ 14 mm Longitudinal Feeds: 0.0012~0.039 in/rev Cross Feeds: 0.0004 ~ 0.0117 in/rev <strong>Tailstock:</strong> Quill Diameter: 2.935″ Quill Travel: 7″ Quill Taper: MT NO.5 <strong>Power:</strong> Spindle Drive Motor: 15 H.P./4P Voltage: 230/460V AC/3 PH <strong>Standard Equipment:</strong> <ul> <li>MAIN MOTOR 15 HP</li> <li>CENTER SLEEVE MT No. 5</li> <li>DEAD CENTER MT NO. 5 X 2 PCs</li> <li>LEVELING SCREW AND BLOCK</li> <li>SERVICE KITS AND TOOL BOX</li> <li>STEADY REST- 1-5/8″~10″</li> <li>DRIVE PLATE- 12″ FOR D1-11 ONLY</li> <li>COOLANT SYSTEM</li> <li>MULTI – POSITION LENGTH STOP</li> <li>3 JAW SCROLL CHUCK- 15″</li> <li>FULL LENGTH SPLASH GUARD</li> <li>HALOGEN LIGHT</li> <li>4 WAY TOOL HOLDER</li> </ul>
    Call for Price
  • ACRA 1550C Precision Gap Bed Engine Lathe with Clutch

    ACRA 1550C Precision Gap Bed Engine Lathe with Clutch

    • Day Rate

      Call for Price
    <strong>Specifications:</strong> <strong>Capacity:</strong> 15″/24″ x 50″ Swing Over Bed: 15-1/4″ Swing Over Cross Slide: 9-3/8″ Swing In Gap: 24″ Distance Between Centers: 50″ Bed Width: 11″ <strong>Headstock:</strong> Spindle Nose: D1-6 Spindle Bore: 2-3/16″ Taper of Spindle: MT NO.5 Spindle Speeds – Steps: 16 step Spindle Speeds – Range: 25 ~ 2,000 RPM <strong>Carriage:</strong> Cross Slide Travel: 9-1/4″ Compound Slide Travel: 4-3/4″ <strong>Threads & Feeds:</strong> Inch Threads: 2~72 TPI Metric Threads: 0.2 ~ 14 mm Longitudinal Feeds: 0.002 ~ 0.067″/rev Cross Feeds: 0.001 ~ 0.0375″/rev <strong>Tailstock:</strong> Quill Diameter: 2-5/16″ Quill Travel: 5″ Quill Taper: MT NO.4 <strong>Power:</strong> Spindle Drive Motor: 7-1/2 HP Voltage: 230V/460V AC / 3 PH <strong>Standard Equipment:</strong> <ul> <li>8″ 3-Jaw Chuck</li> <li>10″ 4-Jaw Chuck</li> <li>Full Length Splash Guard</li> <li>Steady Rest/Follow Rest</li> <li>Coolant System</li> <li>Foot Brake</li> <li>Work Lamp</li> <li>Gap Bed</li> <li>4 position square tool post</li> <li>Tool box with tools</li> </ul>
    Call for Price
  • ACRA 22120ACH Precision Gap Bed Engine Lathe

    ACRA 22120ACH Precision Gap Bed Engine Lathe

    • Day Rate

      Call for Price
    <strong>Specifications:</strong> <strong>Capacity:</strong> 22″/31″ x 120″ Swing Over Bed: 22″ Swing Over Cross Slide: 13-3/8″ Swing In Gap: 31-3/8″ Distance Between Centers: 120″ Bed Width: 15-3/4″ Center Height: 11″ <strong>Headstock:</strong> Spindle Nose: D1-11 Spindle Bore: 4-1/16″ Taper of Spindle: MT NO.7 x MT NO.5 Spindle Speeds – Steps: 12 Spindle Speeds – Range: 13 ~ 1,200 RPM <strong>Carriage:</strong> Cross Slide Travel: 15-3/4″ Compound Slide Travel: 9-1/2″ <strong>Threads & Feeds:</strong> Inch Threads: 2 ~ 72 TPI Metric Threads: 0.2 ~ 14 mm Longitudinal Feeds: 0.0012 ~ 0.039 in/rev Cross Feeds: 0.0004 ~ 0.0117 in/rev <strong>Tailstock:</strong> Quill Diameter: 2.935″ Quill Travel: 7″ Quill Taper: MT NO.5 <strong>Power:</strong> Spindle Drive Motor: 15 HP/4P Voltage: 230/460V AC/3 PH <strong>Standard Equipment:</strong> <ul> <li>MAIN MOTOR 15 HP</li> <li>CENTER SLEEVE MT No. 5</li> <li>DEAD CENTER MT NO. 5 X 2 PCs</li> <li>LEVELING SCREW AND BLOCK</li> <li>SERVICE KITS AND TOOL BOX</li> <li>STEADY REST- 1-5/8″~10″</li> <li>DRIVE PLATE- 12″ FOR D1-11 ONLY</li> <li>COOLANT SYSTEM</li> <li>MULTI – POSITION LENGTH STOP</li> <li>3 JAW SCROLL CHUCK- 15″</li> <li>FULL LENGTH SPLASH GUARD</li> <li>HALOGEN LIGHT</li> <li>4 WAY TOOL HOLDER</li> </ul>
    Call for Price
  • ACRA 26120ACH Precision Gap Bed Engine Lathe

    ACRA 26120ACH Precision Gap Bed Engine Lathe

    • Day Rate

      Call for Price
    <strong>Specifications:</strong> <strong>Capacity:</strong>  26″/35″ x 120″ Swing Over Bed: 26″ Swing Over Cross Slide: 17-1/2″ Swing In Gap: 35-1/8″ Distance Between Centers: 120″ Bed Width: 15-3/4″ <strong>Headstock:</strong> Spindle Nose: D1-11 Spindle Bore: 4-1/16″ Taper of Spindle: MT NO.7 x MT NO.5 Spindle Speeds – Steps: 12 Spindle Speeds – Range: 13 ~ 1,200 RPM <strong>Carriage:</strong> Cross Slide Travel: 15-3/4″ Compound Slide Travel: 9-1/2″> <strong>Threads & Feeds:</strong> Inch Threads: 2 ~ 72 TPI Metric Threads: 0.2 ~ 14 mm Longitudinal Feeds: 0.0012 ~ 0.039 in/rev Cross Feeds: 0.0004 ~ 0.0117 in/rev <strong>Tailstock:</strong> Quill Diameter: 2.935″ Quill Travel: 7″ Quill Taper: MT NO.5 <strong>Power:</strong> Spindle Drive Motor: 15 H.P./4P Voltage: 230/460V AC/3 PH <strong>Standard Equipment:</strong> <ul> <li>MAIN MOTOR 15 HP</li> <li>CENTER SLEEVE MT No. 5</li> <li>DEAD CENTER MT NO. 5 X 2 PCs</li> <li>LEVELING SCREW AND BLOCK</li> <li>SERVICE KITS AND TOOL BOX</li> <li>STEADY REST- 1-5/8″~10″</li> <li>DRIVE PLATE- 12″ FOR D1-11 ONLY</li> <li>COOLANT SYSTEM</li> <li>MULTI – POSITION LENGTH STOP</li> <li>3 JAW SCROLL CHUCK- 15″</li> <li>FULL LENGTH SPLASH GUARD</li> <li>HALOGEN LIGHT</li> <li>4 WAY TOOL HOLDER</li> </ul>
    Call for Price