Specifications
| Discharge Volume | 2〜7ml/stroke (Adjustable) |
|---|---|
| Discharge Pressure | 0.5MPa |
| Working Viscosity Range | 32〜1300mm2/S |
| Reservoir Capacity | 0.8l |
| Weight | 1.2kg |
APPLICATION:
| Model | Part Number | Lever | Reservoir Capacity |
|---|---|---|---|
| L8-L | 103111 | left | 0.8l |
Directions for use
| ● | Replace or clean the suction filter at least once a year. |
| ● | Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range. Refer to the viscosity table. |
| ● | Do not use any special additive-contained oil, water soluble oil and solvent. |
| ● | Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before oil change. |
| ● | Do not over tighten the discharge joint. Refer to the tightening torque table. |
| ● | Do not pull or push the lever by force in a sudden manner. |
| ● | If the pump to be installed on the right side of the machine, choose LK8-TL and if it is to be installed on the left of the machine, choose LK8-TR. |
