<strong>Specifications:</strong>
<strong>Capacity:</strong> 26″/35″ x 120″
Swing Over Bed: 26″
Swing Over Cross Slide: 17-1/2″
Swing In Gap: 35-1/8″
Distance Between Centers: 120″
Bed Width: 15-3/4″
<strong>Headstock:</strong>
Spindle Nose: D1-11
Spindle Bore: 4-1/16″
Taper of Spindle: MT NO.7 x MT NO.5
Spindle Speeds – Steps: 12
Spindle Speeds – Range: 13 ~ 1,200 RPM
<strong>Carriage:</strong>
Cross Slide Travel: 15-3/4″
Compound Slide Travel: 9-1/2″>
<strong>Threads & Feeds:</strong>
Inch Threads: 2 ~ 72 TPI
Metric Threads: 0.2 ~ 14 mm
Longitudinal Feeds: 0.0012 ~ 0.039 in/rev
Cross Feeds: 0.0004 ~ 0.0117 in/rev
<strong>Tailstock:</strong>
Quill Diameter: 2.935″
Quill Travel: 7″
Quill Taper: MT NO.5
<strong>Power:</strong>
Spindle Drive Motor: 15 H.P./4P
Voltage: 230/460V AC/3 PH
<strong>Standard Equipment:</strong>
<ul>
<li>MAIN MOTOR 15 HP</li>
<li>CENTER SLEEVE MT No. 5</li>
<li>DEAD CENTER MT NO. 5 X 2 PCs</li>
<li>LEVELING SCREW AND BLOCK</li>
<li>SERVICE KITS AND TOOL BOX</li>
<li>STEADY REST- 1-5/8″~10″</li>
<li>DRIVE PLATE- 12″ FOR D1-11 ONLY</li>
<li>COOLANT SYSTEM</li>
<li>MULTI – POSITION LENGTH STOP</li>
<li>3 JAW SCROLL CHUCK- 15″</li>
<li>FULL LENGTH SPLASH GUARD</li>
<li>HALOGEN LIGHT</li>
<li>4 WAY TOOL HOLDER</li>
</ul>
Call for Price
<strong>Specifications:</strong>
<strong>Capacity:</strong> 17″/24″ x 43″
Swing Over Bed: 17″
Swing Over Cross Slide: 10-1/2″
Swing In Gap: 24″
Distance Between Centers: 43″
Bed Width: 12″
<strong>Headstock:</strong>
Spindle Nose: D1-6
Spindle Bore: 2-1/4″
Taper of Spindle: MT NO.5
Spindle Speeds – Steps: 12 step
Spindle Speeds – Range: 35 ~ 2,000 RPM
<strong>Carriage:</strong>
Cross Slide Travel: 6-1/2″
Compound Slide Travel: 4″
<strong>Threads & Feeds:</strong>
Inch Threads: 2~72 TPI
Metric Threads: 0.2 ~ 14 mm
Longitudinal Feeds: 0.0012 ~ 0.039″/rev
Cross Feeds: 0.0004 ~ 0.0117″/rev
<strong>Tailstock:</strong>
Quill Diameter: 2-3/8″
Quill Travel: 6″
Quill Taper: MT NO.4
<strong>Power:</strong>
Spindle Drive Motor: 7.5 HP
Voltage: 230/460V AC / 3 PH
<strong>Standard Equipment</strong>
<ul>
<li>10″ 3-Jaw Chuck</li>
<li>12″ 4-Jaw Chuck</li>
<li>Steady Rest</li>
<li>Full Length Splash Guard</li>
<li>Coolant System</li>
<li>4 Way Tool Holder</li>
<li>Foot Brake</li>
<li>Halogen Work Lamp</li>
</ul>
Call for Price
<div class="row">
<div class="col-xs-12 col-sm-6">
<div class="product-feature">
<h2>Standard Features</h2>
<ul>
<li>30 HP, 230V/460V, 3 Phase, 60 Cycle Motor, Switch and Wiring Complete</li>
<li>Spindle Bore: HP 7.09” / HPX 9.25” or 10.1"</li>
<li>Spindle Nose: ASA-A2-15</li>
<li>16 Spindle Speeds: 8 – 700 RPM (HP), 9 – 600 RPM (HPX)</li>
<li>Headstock Spindle Adaptor: ASA-450 to MT#6</li>
<li>Hydraulic Brake System</li>
<li>4-Way Rapid Traverse</li>
<li>T-Slot on Tool Slide</li>
<li>Hardened and Ground Bed and Cross Slide Ways</li>
<li>2-Speed Drive Tailstock Quill</li>
<li>Coolant System with Pump and Piping</li>
<li>Pull Drawer Chip (Coolant) Pan</li>
<li>Rear Chuck Adapter Installed</li>
<li>Front & Rear Chuck Guards</li>
</ul>
</div>
</div>
</div>
<div class="row">
<div class="col-xs-12 col-sm-6">
<div class="product-feature">
<h2>Optional Accessories</h2>
<ul>
<li><span class="s2">11.9”, 19.7” Steady Rest with Roller Jaws</span></li>
<li><span class="s2">23.5” Steady Rest with Roller Jaws </span>(34" & 40” Swing Only)</li>
<li>Roller Bracket</li>
<li>7.9” Follow Rest</li>
<li><span class="s2">Telescopic Taper Attachment </span>±8° & 3.5”/foot, 19.7” Stroke</li>
<li>Drilling Attachment</li>
<li>Carriage Stops</li>
<li>Splash Guard (Factory Installation Only)</li>
<li>Chip Conveyor (Factory Installation Only)</li>
<li>Digital Readout (DRO)</li>
<li>Aloris Quick Change Tool Post & Sets</li>
<li>3-Jaw & 4-Jaw Manual Chucks</li>
</ul>
</div>
</div>
</div>
Call for Price
<strong>Outstanding Features</strong>
3 V Ways, hardened and ground
16 speed spindle from 50 up to 2,750 RPM
Balanced main spindle
Tailstock spindle with American Tang
Carriage with TURCITE to eliminate stick slip, damp cutting vibrations Safety carriage stop
Heavy cast iron machine
Call for Price
