MG metering valve

Lubrication Grease Systems - LubeUSA

Oil systems Grease systems Grease cartridges Spray cooling systems
Tubing parts Reservoirs Accessories


MG / MGA	MGAC

Positive displacement injectors for grease

Specifications

Operating pressure	1.5MPa (15kgf/cm²) 217.5psi
Reset pressure	0.5MPa (5kgf/cm²) 72.5psi

Part Number

MG Type

Part Number	Model	Mark	dischrage volume(cc)	L	B
205061	MG-3	3	0.03	44.5 (1.75")	HEX11
205608	MG-3A-SUS	3	0.03
205062	MG-5	5	0.05
205609	MG-5A-SUS	5	0.05
205063	MG-10	10	0.1
205610	MG-10A-SUS	10	0.1
205064	MG-20	20	0.2	53.5 (2.11")
205611	MG-20A-SUS	20	0.2
205065	MG-30	30	0.3
205612	MG-30A-SUS	30	0.3
205066	MG-50	50	0.5	65 (2.56")
205613	MG-50A-SUS	50	0.5	65 (2.56")
205067	MG-100	100	1	74.5 (2.93")	HEX19
205068	MG-150	150	1.5	74.5 (2.93")	HEX19

Note:MG-100&MG-150 can not be installed on a junction side by side. Please skip every other hole of the junction,when using MG-100&MG-150. Use #540170-plug for the holes skipped.

MGA Type

Model	Mark	dischrage volume(cc)	L	B
MGA-3	3	0.03	53.5	11
MGA-5	5	0.05
MGA-10	10	0.1
MGA-20	20	0.2
MGA-30	30	0.3	65	12
MGA-50	50	0.5	65	12
MGA-100	100	1	74.5	19
MGA-150	150	1.5	77.5	19

MGAC Type

Model	Mark	dischrage volume(cc)	L	B
MGAC-10	10	0.1	62	11
MGAC-20	20	0.2	62	11
MGAC-30	30	0.3	75	12
MGAC-50	50	0.5	75	12
MGAC-100	100	1	94.5	19

Dimensional drawing

Valve operation chart