Call Us!
(800) 288-1202

New Machinery


Used Machinery

Financing Available

Immediate Photos & Quotes By E-mail




Emrick Lubrication Systems

Lube USA Products at Emrick
Back to Lubrication Systems
Automatic intermittent gAutomatic intermittent gear pump AMZ-100S
Automatic intermittent gear pump AMZ-100S
Interval time set with dip switches.
Specifications
Discharge volume 110cc/min(50Hz),120cc/min(60Hz)
Discharge pressure 1.5Mpa(15kgf/cm2) 217.5psi
Power AC100V/1φ, AC200V/1φ(50Hz)
Rated current AC100V/1.8A, AC200V/1.0A(50Hz), AC100V/1.5A, AC200V/0.8A(60Hz)
Motor 18W(50Hz), 17W(60Hz), Skelton motor
Operation rate Max. Discharge time :1min
Min. Interval time : 3min
With controller
Discharge time With initial lubricating function
30 seconds (Fixed) or maximum 75 seconds in conjunction with pressure switch.
Interval 3~570min
Emergency detection Pressure, Oil level
Pressure switch
Operating pressure: 1.3Mpa(13kgf/cm2)188.5psi
reset pressure: 0.9Mpa(9kgf/cm2)130.5psi
Emergency output
contact type
A contact (N.O)
Emergency output
contact capacity
0.5A/AC100V, 0.2A/AC200V
Without controller
Emergency output
contact type
Oil level switch A contact (ON at low level)
Pressure switch A contact (Pressure up ON)
Emergency output
contact capacity
Oil level switch: 0.5A, AC・DC250V/2A
Pressure switch: AC・DC250V/2A0
Weight 1.8ℓ: 3.3kg/7.3lbs, 3ℓ: 4kg/8.8lbs
Reservoir capacity 1.8ℓ, 3ℓ: Resin
3ℓ, 4ℓ, 8ℓ: Metal
 
Part Number
Part Number Pump model Motor Controllar Pressure
100V 200V With Without With Without
202669 AMZ100S-1S-18LP-C O   O   O  
202670 AMZ100S-1S-18LP-C   O O   O  
202678 AMZ100S-1S-18LP O     O   O
202679 AMZ100S-1S-18LP   O   O   O
202671 AMZ100S-1S-18LP-P O     O O  
202672 AMZ100S-1S-18LP-P   O   O O  

Hydraulic circuit drawing
Automatic intermittent gear pump AMZ-100S Hydraulic circuit drawing
Wiring diagram
Automatic intermittent gear pump AMZ-100S Wiring diagram
Dimensional drawing
Automatic intermittent gear pump AMZ-100S Dimensional drawing


2626 East Jensen Avenue • Fresno, California 93706
(559)233-6115 • (800)288-1202 • Fax (559)233-4834

New Machinery New Lathes New Mills New Grinders New Drills New Saws New Fabrication Equipment New Miscellaneous Equipment Used Machinery Used Lathes Used Mills Used Grinders Used Drills Used Saws Used Fabrication Equipment Used Miscellaneous Equipment
Machine Tool Repair & Service LubeUSA Lubrication Products LubeUSA Lubrication Parts LubeUSA Lubrication Catalog Servo Power Feeds


Copyright © 2000 - 2008 -- Emrick Machinery -- All Rights Reserved.
For more information feel free to