Call Us!
(800) 288-1202

New Machinery

Used Machinery

Financing Available

Immediate Photos & Quotes By E-mail

Meca-tron is a controller for automatic intermittent pump by which operation and interval time can be set

Specifications

Power consumption maximum 3W Discharge time 199sec Interval time 199min Emergency output (x,x terminal)ON at low oil level and/or abnormal pressure Contact capacity : AC250V, DC30V Option (1) Oil level switch (Between o-o terminals) (2) Pressure switch (Between P-Pterminals) Use a switch with the minimum capacity of 12V, 10mmA Do not connect to (NC) terminal (V) Terminal (V) is used only when the controller is equipped with the condensor for motor.

Lamp indication

POWER Green lamp is ON when power is turned ON INT(INTERVAL) Yellow lamp is ON during interval DIS(DISCHARGE) Green lamp is ON during discharge EMG(EMERGENCY) Red lamp is ON at low oil level and / or abnormal pressure. TIMER:Digital switch INTERVAL 099min DISCHARGE 099sec ALARM RESET Press the button to reset. INSTANT FEED (Manual discharge) When pressed, it starts discharging and completes its discharge cycle set by the timer.

Part Number

Part Number Model Power voltage Rated load Circit protector 300041 ME2-T Single-phase AC100V/110V 50/60Hz±10% Single-phase 75W motor or equal load 2A 300042 ME2-T Single-phase AC200V220V 50/60Hz±10% 1A 300043 ME2-T Three-phase AC200V/220V 50/60Hz±10% Three-phase 200W motor or equal load

Operation flow chart   Terminal block wiring diagram Dimensional drawing

2626 East Jensen Avenue • Fresno, California 93706
(559)233-6115 • (800)288-1202 • Fax (559)233-4834