Type 150 Power Feed
Semi-automated machining on Class 1 mills to 3 hp
Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque
Intermittent Torque: 120 in.- lb. / 13.6 NM
Continuous Torque: 100 in.- lb. / 11.3 NM
Variable Feed Rate: .50-35 IPM / 13-889 mm/min.
Rapid Traverse: 35 IPM / 889 mm/min.
Gear Reduction Ratio (motor to screw shaft): 72:1.
Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. at full torque.
Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection.
Helical gearing and torque limiting friction saftey clutch with new and improved gear.
Electrical: 110V, 50/60 Hz, 3 Amps
Approx. weight: 15 lb. / 6.8 kg.
|
||||
| Machine |
Table Feed |
Cross Feed |
Knee Feed |
|
| Base Feed – No mounting hardware included |
ECF-150 |
ECF-150 |
see type 140, 200, or 350X |
|
| GENERAL PURPOSE (If your mill model is not listed below, you can use this. Also use this for custom machine applications.) |
see type 140, 200, or 350X |
|||
| ACER 3VS 3VK |
see type 140, 200, or 350X |
|||
| ACER after 1992 |
see type 140, 200, or 350X |
|||
| ACRA MILL 9 x 42 |
|
|
||
| ACRA MILL 9 x 49 |
|
|
||
| ACRA MILL 10 x 50 |
|
|
||
| ACRA MILL 10 x 54 |
see type 140, 200, or 350X |
|||
| ALLIANT |
see type 140, 200, or 350X |
|||
| ALLIANT RT2-50 |
see type 140, 200, or 350X |
|||
| ATRUMP |
see type 140, 200, or 350X |
|||
| BIRMINGHAM 942, 1050 |
see type 140, 200, or 350X |
|||
| BRIDGEPORT SERIES I (hand fed mill) If you’re not sure, see this. |
|
see type 140, 200, or 350X |
||
| BRIDGEPORT (replaces electronic feed) For description, see this. If you need information on this model for S/N 564146 or older, see this. |
|
see type 140, 200, or 350X |
||
| BRIDGEPORT (replaces gear box feed) For description, see this. |
|
see type 140, 200, or 350X |
||
| BRIDGEPORT 12″ CROSS TRAVEL |
|
see type 140, 200, or 350X |
||
| BRIDGEPORT 9″ CROSS TRAVEL |
|
see type 140, 200, or 350X |
||
| BRIDGEPORT SERIES II |
see Type 200/350X |
|||
| BRIDGEPORT SERIES II SPECIAL |
see Type 200/350X |
|||
| BRIDGEPORT (After Aug 2010) |
|
|||
| BRUTE 9 x 42, 9 x 49 |
see type 140, 200, or 350X |
|||
| BRUTE 10 x 50 |
|
|||
| CHEVALIER, LARGE & SMALL |
see type 140, 200, or 350X |
|||
| CLAUSING ATLAS / KALAMAZOO |
|
|||
| CLAUSING KONDIA |
see type 140, 200, or 350X |
|||
| CLAUSING KONDIA FV-300 |
|
|||
| CLAUSING 400EVS, 450EVS, 500EVS |
see type 140, 200, or 350X |
|||
| COMET INCH (.625 dia lead screw) |
|
see type 140, 200, or 350X |
||
| COMET METRIC (.630 dia lead screw) |
|
see type 140, 200, or 350X |
||
| COMET 9 x 42, 3VHG, 2SHG |
|
see type 140, 200, or 350X |
||
| COMET 10 x 50 3KV |
|
see type 140, 200, or 350X |
||
| COMET 10 x 50 3KVHD, 3KVHD-B, |
|
|
see type 140, 200, or 350X |
|
| COMET 10 x 54 4KVHD |
|
|
see type 140, 200, or 350X |
|
| COMET 10 x 50 5KVHD |
|
|
see type 140, 200, or 350X |
|
| CONCORD |
|
|
||
| DO ALL |
see type 140, 200, or 350X |
|||
| EDELSTALL F10V, 401 |
|
|
||
| EDISON |
|
|
||
| ENCO 100-1527, 9 x 42 |
|
|
||
| ENCO 100-1588, 10 x 54 |
|
|
||
| ENCO 231 |
see type 140, 200, or 350X |
|
|
|
| ENCO 249 |
|
|
||
| ENTERPRISE |
|
|||
| EXACTO |
see type 140, 200, or 350X |
|||
| EX-CELL-O 602 (no coolant trough) |
see type 140, 200, or 350X |
|||
| EX-CELL-O 602 (with coolant trough) |
see type 140, 200, or 350X |
|||
| FIRST YAMAZEN |
|
|
||
| HARTFORD |
|
|||
| HOLKE MACHINIST |
|
|||
| HOLKE S/N 5172 UP |
|
|||
| HURCO SM1 |
see type 140, 200, or 350X |
|||
| HURCO SM2 |
|
|||
| INDEX 45, 645, 745 |
|
|
||
| INDEX 747, 847, 860, 887 |
|
|
see type 140, 200, or 350X |
|
| JET 1048 VS |
|
|
||
| JET Y |
|
|
||
| JOHNFORD MV54 |
see type 140, 200, or 350X |
|||
| KENT 2S |
see type 140, 200, or 350X |
|||
| KENT 3VK, 4VK, 5VK |
see type 140, 200, or 350X |
|||
| KENT 5KV |
|
|
see type 140, 200, or 350X |
|
| KINGSTON KTM 3V |
see type 140, 200, or 350X |
|||
| KONDIA G & FV1 |
see type 140, 200, or 350X |
|||
| KONDIA 2 |
|
|||
| LAGUN |
see type 140, 200, or 350X |
|||
| LAGUN FTV3 |
M-1501-150 |
|
see Type 200/350X |
|
| MARENA 942 |
|
|
||
| MARENA 10 |
|
|||
| MAXMILL |
see type 140, 200, or 350X |
|||
| MICROCUT |
see type 140, 200, or 350X |
|||
| MILLPORT 2S, 3V, 3VH |
see type 140, 200, or 350X |
|||
| MILLPORT K MILL |
|
see type 140, 200, or 350X |
||
| MILLPORT 10 x 50 |
|
|
||
| NEWPORT |
|
|||
| SELECT 1VB (.630 dia lead screw) |
|
|
||
| SELECT 1VB (.625 dia lead screw) |
|
|
||
| SELECT 1VBVS |
|
|
||
| SERVO SV50 |
see type 140, 200, or 350X |
|||
| SERVO SV54 |
see Type 200/350X |
|||
| SHARP FIRST, LMV, LCS |
see type 140, 200, or 350X |
|||
| SHARP HMV, OMV, QMV1, QMV2, TMV |
see type 140, 200, or 350X |
|||
| SHARP 1-1/2 YC |
|
|
||
| SHARP VIA |
|
|
||
| SIBER HEGNER RB1 |
|
|||
| SOUTH BEND IMPORT |
|
|
||
| SOUTH BEND 2 HP |
|
|
||
| SOUTH BEND 3 HP |
|
|
||
| SOUTH BEND / SE+5-DIGIT SER. # |
see type 140, 200, or 350X |
|||
| SOUTHWESTERN TRAK TRM |
|
|
see type 140, 200, or 350X |
|
| SUPERMAX 1-1/2 , 16KV |
see type 140, 200, or 350X |
|||
| SUPERMAX 16VA |
|
|
see type 140, 200, or 350X |
|
| TOPWELL |
|
|
||
| VICTOR VSK or VK |
|
|
||
| VICTOR, 16 VSK or VK |
see type 140, 200, or 350X |
|||
| VICTOR, 380 VSK or VK |
|
|
see type 140, 200, or 350X |
|
| WEBB |
|
|
||
| WEBB CHAMP |
|
|||
| WEBB CHAMP 1-1/2 (before Jan’91) |
|
|
see type 140, 200, or 350X |
|
| WEBB CHAMP 1-1/2 (after Jan’91) |
|
|
see type 140, 200, or 350X |
|
| WELLS INDEX 747, 847, 860, 889 |
|
see type 140, 200, or 350X |
||
| WELLS INDEX 837 |
see type 140, 200, or 350X |
|||
| WILLIS MICRO CUT |
|
|
||
