Type 150 Power Feed
Semi-automated machining on Class 1 mills to 3 hp
Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque
Intermittent Torque: 120 in.- lb. / 13.6 NM
Continuous Torque: 100 in.- lb. / 11.3 NM
Variable Feed Rate: .50-35 IPM / 13-889 mm/min.
Rapid Traverse: 35 IPM / 889 mm/min.
Gear Reduction Ratio (motor to screw shaft): 72:1.
Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. at full torque.
Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection.
Helical gearing and torque limiting friction saftey clutch with new and improved gear.
Electrical: 110V, 50/60 Hz, 3 Amps
Approx. weight: 15 lb. / 6.8 kg.
|
||||
Machine |
Table Feed |
Cross Feed |
Knee Feed |
|
Base Feed – No mounting hardware included |
ECF-150 |
ECF-150 |
see type 140, 200, or 350X |
|
GENERAL PURPOSE (If your mill model is not listed below, you can use this. Also use this for custom machine applications.) |
see type 140, 200, or 350X |
|||
ACER 3VS 3VK |
see type 140, 200, or 350X |
|||
ACER after 1992 |
see type 140, 200, or 350X |
|||
ACRA MILL 9 x 42 |
|
|
||
ACRA MILL 9 x 49 |
|
|
||
ACRA MILL 10 x 50 |
|
|
||
ACRA MILL 10 x 54 |
see type 140, 200, or 350X |
|||
ALLIANT |
see type 140, 200, or 350X |
|||
ALLIANT RT2-50 |
see type 140, 200, or 350X |
|||
ATRUMP |
see type 140, 200, or 350X |
|||
BIRMINGHAM 942, 1050 |
see type 140, 200, or 350X |
|||
BRIDGEPORT SERIES I (hand fed mill) If you’re not sure, see this. |
|
see type 140, 200, or 350X |
||
BRIDGEPORT (replaces electronic feed) For description, see this. If you need information on this model for S/N 564146 or older, see this. |
|
see type 140, 200, or 350X |
||
BRIDGEPORT (replaces gear box feed) For description, see this. |
|
see type 140, 200, or 350X |
||
BRIDGEPORT 12″ CROSS TRAVEL |
|
see type 140, 200, or 350X |
||
BRIDGEPORT 9″ CROSS TRAVEL |
|
see type 140, 200, or 350X |
||
BRIDGEPORT SERIES II |
see Type 200/350X |
|||
BRIDGEPORT SERIES II SPECIAL |
see Type 200/350X |
|||
BRIDGEPORT (After Aug 2010) |
|
|||
BRUTE 9 x 42, 9 x 49 |
see type 140, 200, or 350X |
|||
BRUTE 10 x 50 |
|
|||
CHEVALIER, LARGE & SMALL |
see type 140, 200, or 350X |
|||
CLAUSING ATLAS / KALAMAZOO |
|
|||
CLAUSING KONDIA |
see type 140, 200, or 350X |
|||
CLAUSING KONDIA FV-300 |
|
|||
CLAUSING 400EVS, 450EVS, 500EVS |
see type 140, 200, or 350X |
|||
COMET INCH (.625 dia lead screw) |
|
see type 140, 200, or 350X |
||
COMET METRIC (.630 dia lead screw) |
|
see type 140, 200, or 350X |
||
COMET 9 x 42, 3VHG, 2SHG |
|
see type 140, 200, or 350X |
||
COMET 10 x 50 3KV |
|
see type 140, 200, or 350X |
||
COMET 10 x 50 3KVHD, 3KVHD-B, |
|
|
see type 140, 200, or 350X |
|
COMET 10 x 54 4KVHD |
|
|
see type 140, 200, or 350X |
|
COMET 10 x 50 5KVHD |
|
|
see type 140, 200, or 350X |
|
CONCORD |
|
|
||
DO ALL |
see type 140, 200, or 350X |
|||
EDELSTALL F10V, 401 |
|
|
||
EDISON |
|
|
||
ENCO 100-1527, 9 x 42 |
|
|
||
ENCO 100-1588, 10 x 54 |
|
|
||
ENCO 231 |
see type 140, 200, or 350X |
|
|
|
ENCO 249 |
|
|
||
ENTERPRISE |
|
|||
EXACTO |
see type 140, 200, or 350X |
|||
EX-CELL-O 602 (no coolant trough) |
see type 140, 200, or 350X |
|||
EX-CELL-O 602 (with coolant trough) |
see type 140, 200, or 350X |
|||
FIRST YAMAZEN |
|
|
||
HARTFORD |
|
|||
HOLKE MACHINIST |
|
|||
HOLKE S/N 5172 UP |
|
|||
HURCO SM1 |
see type 140, 200, or 350X |
|||
HURCO SM2 |
|
|||
INDEX 45, 645, 745 |
|
|
||
INDEX 747, 847, 860, 887 |
|
|
see type 140, 200, or 350X |
|
JET 1048 VS |
|
|
||
JET Y |
|
|
||
JOHNFORD MV54 |
see type 140, 200, or 350X |
|||
KENT 2S |
see type 140, 200, or 350X |
|||
KENT 3VK, 4VK, 5VK |
see type 140, 200, or 350X |
|||
KENT 5KV |
|
|
see type 140, 200, or 350X |
|
KINGSTON KTM 3V |
see type 140, 200, or 350X |
|||
KONDIA G & FV1 |
see type 140, 200, or 350X |
|||
KONDIA 2 |
|
|||
LAGUN |
see type 140, 200, or 350X |
|||
LAGUN FTV3 |
M-1501-150 |
|
see Type 200/350X |
|
MARENA 942 |
|
|
||
MARENA 10 |
|
|||
MAXMILL |
see type 140, 200, or 350X |
|||
MICROCUT |
see type 140, 200, or 350X |
|||
MILLPORT 2S, 3V, 3VH |
see type 140, 200, or 350X |
|||
MILLPORT K MILL |
|
see type 140, 200, or 350X |
||
MILLPORT 10 x 50 |
|
|
||
NEWPORT |
|
|||
SELECT 1VB (.630 dia lead screw) |
|
|
||
SELECT 1VB (.625 dia lead screw) |
|
|
||
SELECT 1VBVS |
|
|
||
SERVO SV50 |
see type 140, 200, or 350X |
|||
SERVO SV54 |
see Type 200/350X |
|||
SHARP FIRST, LMV, LCS |
see type 140, 200, or 350X |
|||
SHARP HMV, OMV, QMV1, QMV2, TMV |
see type 140, 200, or 350X |
|||
SHARP 1-1/2 YC |
|
|
||
SHARP VIA |
|
|
||
SIBER HEGNER RB1 |
|
|||
SOUTH BEND IMPORT |
|
|
||
SOUTH BEND 2 HP |
|
|
||
SOUTH BEND 3 HP |
|
|
||
SOUTH BEND / SE+5-DIGIT SER. # |
see type 140, 200, or 350X |
|||
SOUTHWESTERN TRAK TRM |
|
|
see type 140, 200, or 350X |
|
SUPERMAX 1-1/2 , 16KV |
see type 140, 200, or 350X |
|||
SUPERMAX 16VA |
|
|
see type 140, 200, or 350X |
|
TOPWELL |
|
|
||
VICTOR VSK or VK |
|
|
||
VICTOR, 16 VSK or VK |
see type 140, 200, or 350X |
|||
VICTOR, 380 VSK or VK |
|
|
see type 140, 200, or 350X |
|
WEBB |
|
|
||
WEBB CHAMP |
|
|||
WEBB CHAMP 1-1/2 (before Jan’91) |
|
|
see type 140, 200, or 350X |
|
WEBB CHAMP 1-1/2 (after Jan’91) |
|
|
see type 140, 200, or 350X |
|
WELLS INDEX 747, 847, 860, 889 |
|
see type 140, 200, or 350X |
||
WELLS INDEX 837 |
see type 140, 200, or 350X |
|||
WILLIS MICRO CUT |
|
|
||