Type 140 – Knee, Table, and Cross Feeds
Semi-automated machining on Class 1 mills to 3 hp.
Peak torque (half-wave series motor): to 140 in-lb / 15.8 N×m torque
Intermittent torque: 105 in-lb / 11.9 N×m
Continuous torque: 90 in-lb / 10.2 N×m
Variable feed rate: .75-25 ipm / 19-635 mm/min. (table and cross); .5-12 ipm / 13-305 mm/min. (knee).
Rapid traverse: 35 ipm / 889 mm/min. (table and cross); 12 ipm / 305 mm/min. (knee).
Gear reduction ratio (motor to screw shaft): 72:1.
Helical gearing and torque limiting friction safety clutch with new and improved gear.
Electrical: 110V, 50/60 Hz, 2.5 Amps.
Approximate weight: 15 lb. / 6.8 kg.
This is a base model ECF-140, No brackets are included. If you need brackets please call us with the make and model of your milling machine.
|
||||
Machine |
Table Feed |
Cross Feed |
Knee Feed |
|
Base Feed – No mounting hardware included |
ECF-140 |
ECF-140 |
ECF-140KNEE |
|
GENERAL PURPOSE (If your mill model is not listed below, you can use this. Also use this for custom machine applications.) |
||||
ACER 3VS 3VK | ||||
ACER after 1992 | ||||
ACRA MILL 9 x 42 |
|
|
||
ACRA MILL 9 x 49 |
|
|
||
ACRA MILL 10 x 50 |
|
|
||
ACRA MILL 10 x 54 | ||||
ALLIANT | ||||
ALLIANT RT2-50 | ||||
ATRUMP | ||||
BIRMINGHAM 942, 1050 | ||||
BRIDGEPORT SERIES I (hand fed mill) If you’re not sure, see this. |
|
|||
BRIDGEPORT (replaces electronic feed) For description, see this. If you need information on this model for S/N 564146 or older, see this. |
|
|||
BRIDGEPORT (replaces gear box feed) For description, see this. |
|
|||
BRIDGEPORT 12″ CROSS TRAVEL |
|
|||
BRIDGEPORT 9″ CROSS TRAVEL |
|
|||
BRIDGEPORT SERIES II |
see Type 200/350X |
|||
BRIDGEPORT SERIES II SPECIAL |
see Type 200/350X |
|||
BRIDGEPORT (After Aug 2010) |
|
|||
BRUTE 9 x 42, 9 x 49 | ||||
BRUTE 10 x 50 |
|
|||
CHEVALIER, LARGE & SMALL | ||||
CLAUSING ATLAS / KALAMAZOO |
|
|||
CLAUSING KONDIA | ||||
CLAUSING KONDIA FV-300 |
see Type 150 |
see Type 150 |
|
|
CLAUSING 400EVS, 450EVS, 500EVS | ||||
COMET INCH (.625 dia lead screw) |
|
|
||
COMET METRIC (.630 dia lead screw) |
|
|
||
COMET 9 x 42, 3VHG, 2SHG |
|
|||
COMET 10 x 50 3KV |
|
|||
COMET 10 x 50 3KVHD, 3KVHD-B, |
|
|
||
COMET 10 x 54 4KVHD |
|
|
||
COMET 10 x 50 5KVHD |
|
|
||
CONCORD |
|
|
||
DO ALL | ||||
EDELSTALL F10V, 401 |
|
|
||
EDISON |
|
|
||
ENCO 100-1527, 9 x 42 |
|
|
||
ENCO 100-1588, 10 x 54 |
|
|
||
ENCO 231 |
|
|
||
ENCO 249 |
see Type 150 |
|
|
|
ENTERPRISE |
|
|||
EXACTO | ||||
EX-CELL-O 602 (no coolant trough) | ||||
EX-CELL-O 602 (w/coolant trough) | ||||
FIRST YAMAZEN |
|
|
||
HARTFORD |
|
|||
HOLKE MACHINIST |
|
|||
HOLKE S/N 5172 UP |
|
|||
HURCO SM1 | ||||
HURCO SM2 |
see Type 150 |
see Type 150 |
|
|
INDEX 45, 645, 745 |
|
|
||
INDEX 747, 847, 860, 887 |
|
|
||
JET 1048 VS |
|
|
||
JET Y |
|
|
||
JOHNFORD MV54 | ||||
KENT 2S | ||||
KENT 3VK, 4VK, 5VK | ||||
KENT 5KV |
|
|
||
KINGSTON KTM 3V | ||||
KONDIA G & FV1 | ||||
KONDIA 2 |
see Type 150 |
see Type 150 |
|
|
LAGUN | ||||
LAGUN FTV3 |
see Type 150 |
|
see Type 200/350X |
|
MARENA 942 |
|
|
||
MARENA 10 |
|
|||
MAXMILL | ||||
MICROCUT | ||||
MILLPORT 2S, 3V, 3VH | ||||
MILLPORT K MILL |
|
|||
MILLPORT 10 x 50 |
|
|
||
NEWPORT |
|
|||
SELECT 1VB (.630 dia lead screw) |
|
|
||
SELECT 1VB (.625 dia lead screw) |
|
|
||
SELECT 1VBVS |
|
|
||
SERVO SV50 | ||||
SERVO SV54 |
see Type 200/350X |
|||
SHARP FIRST, LMV, LCS | ||||
SHARP HMV, OMV, QMV1, QMV2, TMV |
M-4380-140 |
|||
SHARP 1-1/2 YC |
|
|
||
SHARP VIA |
|
|
||
SIBER HEGNER RB1 |
|
|||
SOUTH BEND IMPORT |
|
|
||
SOUTH BEND 2 HP |
|
|
||
SOUTH BEND 3 HP |
|
|
||
SOUTH BEND / SE+5-DIGIT SER. # | ||||
SOUTHWESTERN TRAK TRM |
|
|
||
SUPERMAX 1-1/2 , 16KV | ||||
SUPERMAX 16VA |
|
|
||
TOPWELL |
|
|
||
VICTOR VSK or VK |
|
|
||
VICTOR, 16 VSK or VK | ||||
VICTOR, 380 VSK or VK |
|
|
||
WEBB |
|
|
||
WEBB CHAMP |
see type 150 |
|
||
WEBB CHAMP 1-1/2 (before Jan ’91) |
|
|
||
WEBB CHAMP 1-1/2 (after Jan ’91) |
|
|
||
WELLS INDEX 747, 847, 860, 889 |
see Type 150 |
|
see Index |
|
WELLS INDEX 837 | ||||
WILLIS MICRO CUT |
|
|
||
|
|
|