Get Adobe Flash player
(559) 233-6115

Kingston Lathe HD Series



Kingston Lathe HD Series
HD-22x60", 22x90", 22x120", 22x160"
HD-26x60", 26x90", 26x120", 26x160"

  • Swing over bed: 22" - 26"

  • Swing over cross slide: 13" - 17 1/2"

  • Swing in gap: 31 3/8" - 35 1/8"

  • Gap width in front of face plate: 10 5/8"


  • CAPACITY
  • Distance between centers: 60", 90", 120", 160"

  • Width of bed: 15-3/4"

  • Maximum travel of Compound: 9-17/32"

  • Maximum travel of cross slide: 15-3/4"

  • Height of center from leg bottom: 42" - 44-5/16"


  • HEADSTOCK
  • Spindle bore: 4-1/16"

  • Taper of spindle bore & center M.T.: M.T. NO. 7 x NO.5

  • Type of spindle nose: D2-8, D1-11

  • Number of spindle speeds changes: 12

  • Range of spindle speeds: 13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, and 1200 RPM


  • THREAD & FEED
  • Number of feed changes: 16

  • Range of longitudinal feeds per revolution: 0.0012"-0.039"

  • Range of cross feeds per revolution: 1/3 of longitudinal feeds

  • Lead screw diameter and pitch In, TPI 1 3/4", 4 TPI, or 2 TPI

  • Range of inch threads TPI (Kinds) 4 TPI: 2-72 (44) OR 2 TPI: 1-36 (44)*

  • Range of metric pitches MM(kinds): 0.2-14(39)


  • TAILSTOCK
  • Total travel of tailstock quill: 7"

  • Tailstock quill diameter: 2-15/16"

  • Taper in tailstock quill MT: M.T. NO.5


  • MOTORS
  • Spindle drive motor: HP 10HP/4P - 15HP/4P

  • Coolant pump notor: HP 1/4HP


  • STANDARD ACCESSORIES
  • Multi-position longitudinal stop

  • Center sleeve M.T. NO.7x5

  • Dead center M.T. NO.5 - 1 tungsten carbide, 1 medium carbon

  • Levelling screws

  • Service kits

  • Main motor 10HP(4P) or 15HP(4P)

  • Drive plate: 10"

  • Complete coolant equipment


  • EXTRA ACCESSORIES
  • Steady rest

  • Follow rest

  • Face plate: 19.7"

  • Taper turning attachment

  • 3-jaw scroll chuck

  • 4-jaw independent chuck

  • Drilling attachment

  • Worklight

  • Rear toolpost

  • Turret carriage stop

  • Micrometer carriage stop

  • Full length splash gaurd

  • Rapid feeding of apron


  • Prices upon request.


    Specifcations and prices are subject to cahnge without notice.



    Financing Available

    Immediate Photos &
    Quotes By E-mail

    Contact Info
    Emrick Machinery Sales, Inc.
    2626 East Jensen Avenue
    Fresno, California  93706

    Phone: (559) 233-6115
    Toll Free: (800) 288-1202
    Fax: (559) 233-4834


    Map to Our Location